an image

SOLID STATE POWER RELAY

SSR Power Relay

 SSR POWER Relay

DIAGRAMS

LOAD CURRENT VS. AMBIENT TEMPERATURE

LOAD CURRENT VS. AMBIENT TEMPERATURE 100A Relay

100A Relay

LOAD CURRENT VS. AMBIENT TEMPERATURE 250A Relay

250A Relay

SSR POWER Dimensions

Dimensions

  • AC Solid state relay, zero crossing.
  • Input range: 3 – 32 VDC.
  • Maximum load current (AC1 at 25o C): 100, 150, 250 A.
  • Operational ratings: 40 – 400 VAC.
  • Frequency range: 50 – 60 Hz.
  • Maximum non-repetitive peak voltage: 930 Vp.
  • LED indicator.

DOWNLOADS

REFERENCIAS

Control voltage Operational voltage Operational current Reference Reference heat sinks
3 -32 VDC 40 – 440 VAC 100 A RS1C14LN0100 SH-3180
150 A RS1C14LN0150 SH-3180
250 A RS1C14LN0250 SH-3180

Over 10 A load a heat sink must be used. The use of a heat sink will make the lifetime of the relay up to four times longer, even when using it with load currents lower than 10 A.

GENERAL SPECIFICATIONS

Dielectric insulation (between input & output) 2.500 VAC
Operating temperature -25ºC a 70ºC
Storage temperature -35ºC a 85ªC
Ambient humidity Operating: up to 85 %
CE marking Yes

INPUT SPECIFICATIONS

Control voltage range 3 – 32 VDC
Input current (max) 6/35 mA @= 3/32 V
Pick-up voltage 3 VDC
Drop-out voltage 1 VDC
Maximum reverse voltage 32 VDC
Max. response time pick-up (50Hz) 10 ms
Max. response time drop-out (50Hz) 10 ms

OUTPUT SPECIFICATIONS

Maximum load current
(AC51 @ Ta = 25° C)
(AC53a @ Ta = 25° C)

100, 150, 250 A
5, 15, 18, 20A
Load voltage range 40 – 440 VAC
Frequency range 50 – 60 Hz
Max. non-repetitive peak voltage 930 Vp
Max. non-repetitive peak current (t=10ms) (t = 10 ms) 1.100 Ap/100 A
1.450 Ap/150A
2.200 Ap/250 A
Maximum off state leakage current 10 mArms
Minimum off state dv / dt 500 V / μseg
Maximum on state voltageo <1,6 VCA
Minimum load current 0,1 Arms
I2t (10 ms) (orientative data) 6.050A 2s (100A)
10.500A 2s (150A)
24.200A 2s (250A)

HOUSING SPECIFICATIONS

Dimensions (L x W x H mm) 94 x 34 x 43
Weight 235 gr. max-
Baseplate Aluminum, nickel-plated
Control terminal (M3x6) torque 2,4 Nm
Power terminal (M5x9) torque 1,2 Nm

ACCESORIOS